Mean Well IDLC / IDPC-65 Series

Mean Well IDLC Series LED Driver
R.F.Q. (REQUEST FOR QUOTE)
Wattage 65W
Features
  • 180~295VAC input only
  • Flicker free design
  • Class II design, no F.G
  • Built-in active PFC function
  • Built-in 2 in 1 dimming function (0~10VDC or PWM signal)
  • 12V/50mA auxiliary output (A-Type)
  • No load power consumption: Blank-Type < 0.5W, A-Type <1.2W
  • Protections: Short circuit
  • Working temperature—IDLC:-20~+85℃(Tcase), IDPC：-20~+40℃(Ta)
  • Comply with UL/CUL/ENEC/CB/CCC/CE
  • Dimension (L x W x H)—IDLC: 130 x 75 x 25 mm，IDPC: 130 x 67.5 x 20.5 mm
  • 3 years warranty
Model No. Data Link IDLC-65 / IDPC-65

For more information or to speak with a Power 277 professional please call toll free: (877) 878-2348 or for international calls (001) 702-987-3111.

Mean Well IDLC / IDPC-65 Series General Description

Once the 45W IDLC-45 and IDPC-45 series which with flicker free design of MEAN WELL are released to the market, they have become popular and widely adopted by indoor LED lighting system designers that MEAN WELL decides to raise the output wattage from 45W to 65W and is pleased to unveil the 65W IDLC-65 (plastic housing) and IDPC-65 (PCB type) series.

In order to meet the design and the installation requirements of the indoor luminaires, these two series adopt co-design work (like IDLC-45 and IDPC-45 series) that the differences are merely in the appearance and the mechanism. They both have the same electrical specifications like accepting 180~295VAC input, with built-in active PFC function, providing various models with 700mA/1050mA/1400mA/1750mA constant current output and the highest working efficiency up to 89%. They are compliant with UL8750, ENEC EN61347-1,-2-13 and GB19510.1, .14 international safety regulations of LED lighting. The standard product has a built-in 2 in 1 dimming function (12V/50mA auxiliary output are also offered for A-Type models) that the LED luminaire system manufacturers can take advantage of higher flexibility while planning the layout. These two series are very suitable to be applied to the indoor LED luminaires requiring flicker free and low power consumption, such as LED panel lighting and LED flood lighting.

Mean Well IDLC / IDPC-65 Series Features

  • 180~295VAC input only
  • Flicker free design
  • Class II design, no F.G
  • Built-in active PFC function
  • Built-in 2 in 1 dimming function (0~10VDC or PWM signal)
  • 12V/50mA auxiliary output (A-Type)
  • No load power consumption: Blank-Type < 0.5W, A-Type <1.2W
  • Protections: Short circuit
  • Working temperature—IDLC:-20~+85℃(Tcase), IDPC：-20~+40℃(Ta)
  • Comply with UL/CUL/ENEC/CB/CCC/CE
  • Dimension (L x W x H)—IDLC: 130 x 75 x 25 mm，IDPC: 130 x 67.5 x 20.5 mm
  • 3 years warranty

  • Mean Well IDLC-65 LED Driver Specifications

    Mean Well IDLC-65 LED Driver Description

    IDLC-65 series is a 65W LED AC/DC driver featuring the constant current mode output with flicker free design. IDLC-65 operates from 180-295VAC and offers models with different rated current ranging between 700mA and 1750mA. Thanks to the high efficiency up to 89%, with the fanless design, the entire series is able to operate for -20℃-+85℃ case temperature under free air convection.

    IDLC-65 is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for lighting system.

     

    Mean Well IDLC-65 LED Driver Features:

    • Constant Current mode output
    • Flicker free design
    • Plastic housing with class II design
    • Built-in active PFC function
    • No load power consumption<0.5W(Blank-Type)
    • Function options: 2 in 1 dimming (dim-to-off); Auxiliary DC output
    • 3 years warranty

     

    Specifications

    MODEL IDLC-65 -700 IDLC-65 -1050 IDLC-65 -1400 IDLC-65 -1750
    OUTPUT RATED CURRENT 700mA 1050mA 1400mA 1750mA
    RATED POWER 65.1W 65.1W 64.4W 63W
    CONSTANT CURRENT REGION Note.2 69 ~ 93V 46 ~ 62V 34 ~ 46V 27 ~ 36V
    OPEN CIRCUIT VOLTAGE(max.) 118V 82V 60V 53V
    CURRENT RIPPLE 5% max. @rated current
    CURRENT TOLERANCE ±7.0%
    SETUP TIME Note.4 500ms / 230VAC
    AUXILIARY DC OUTPUT Note.5 Nominal 12V(deviation 11.4~12.6)@50mA for A-Type only
    INPUT VOLTAGE RANGE Note.3 180 ~ 295VAC 254 ~ 417VDC (Please refer to “STATIC CHARACTERISTIC” section)
    FREQUENCY RANGE 47 ~ 63Hz
    POWER FACTOR (Typ.) PF>0.95/230VAC, PF>0.9/277VAC@full load (Please refer to “POWER FACTOR (PF) CHARACTERISTIC” section)
    TOTAL HARMONIC DISTORTION THD< 20%@load?75%/230VAC,277VAC (Please refer to "TOTAL HARMONIC DISTORTION" section)
    EFFICIENCY (Typ.) 89% 87% 86% 86%
    AC CURRENT 0.4A/230VAC 0.3A/277VAC
    INRUSH CURRENT (Typ.) COLD START 30A(twidth=100?s measured at 50% Ipeak) at 230VAC; Per NEMA 410
    MAX. No. of PSUs on 16A CIRCUIT BREAKER 32 units (circuit breaker of type B) / 32 units (circuit breaker of type C) at 230VAC
    LEAKAGE CURRENT <0.75mA / 277VAC
    NO LOAD POWER CONSUMPTION <0.5W for Blank-Type, <1.2W for A-Type
    PROTECTION SHORT CIRCUIT Hiccup mode, re-power on to recovery
    ENVIRONMENT WORKING TEMP. Tcase=-20 ~ +85? (Please refer to ” OUTPUT LOAD vs TEMPERATURE” section)
    MAX. CASE TEMP. Tcase=+85?
    WORKING HUMIDITY 20 ~ 90% RH non-condensing
    STORAGE TEMP., HUMIDITY -40 ~ +80?, 10 ~ 95% RH
    TEMP. COEFFICIENT ±0.03%/? (0 ~ 40?)
    VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
    SAFETY & EMC SAFETY STANDARDS UL8750;CSA C22.2 NO.250.13-12; ENEC EN61347-1 & EN61347-2-13 independent, EN62384, GB19510.1,GB19510.14 approved
    WITHSTAND VOLTAGE I/P-O/P:3.75KVAC
    ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25?/ 70% RH
    EMC EMISSION Compliance to EN55015, EN61000-3-2 Class C (?75% load) ; EN61000-3-3,GB17743,GB17625.1
    EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level(surge immunity:Line-Line:1KV)
    OTHERS MTBF 380.7Khrs min. MIL-HDBK-217F (25?)
    DIMENSION 130*75*25mm(L*W*H)
    PACKING 0.23Kg; 54pcs/ 13.5Kg/ 0.96CUFT
    NOTE All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25? of ambient temperature. Please refer to “DRIVING METHODS OF LED MODULE”. De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details. Length of set up time is measured at cold first start. Turning ON/OFF the driver may lead to increase of the set up time or set up failure. There is no design of short circuit protection for the Auxiliary DC output; this function can not be used when dimming input terminals(DIM+,DIM-) are short circuit or when it is no load or short circuit at output(Vo+,Vo-). The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.

  • Mean Well IDPC-65 LED Driver Specifications

    Mean Well IDPC-65 LED Driver Description

    IDPC-65 series is a 65W PCB type LED AC/DC driver featuring the constant current mode output with flicker free design. IDPC-65 operates from 180-295VAC and offers models with different rated current ranging between 700mA and 1750mA. Thanks to the efficiency up to 89%, with the fanless design, the entire series is able to operate for -20℃-+40℃ ambient temperature under free air convection.

    IDPC-65 is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for lighting system.

     

    Mean Well IDPC-65 LED Driver Features:

    • Constant Current mode output
    • Flicker free design
    • Plastic housing with class II design
    • Built-in active PFC function
    • No load power consumption<0.5W(Blank-Type)
    • Function options: 2 in 1 dimming (dim-to-off); Auxiliary DC output
    • 3 years warranty


     

    Mean Well IDPC-65 LED Driver Specifications

    MODEL IDPC-65 -700 IDPC-65 -1050 IDPC-65 -1400 IDPC-65 -1750
    OUTPUT RATED CURRENT 700mA 1050mA 1400mA 1750mA
    RATED POWER 65.1W 65.1W 64.4W 63W
    CONSTANT CURRENT REGION Note.2 69 ~ 93V 46 ~ 62V 34 ~ 46V 27 ~ 36V
    OPEN CIRCUIT VOLTAGE(max.) 118V 82V 60V 53V
    CURRENT RIPPLE 5% max. @rated current
    CURRENT TOLERANCE ±7.0%
    SETUP TIME Note.4 500ms / 230VAC
    AUXILIARY DC OUTPUT Note.5 Nominal 12V(deviation 11.4~12.6)@50mA for A-Type only
    INPUT VOLTAGE RANGE Note.3 180 ~ 295VAC 254 ~ 417VDC (Please refer to “STATIC CHARACTERISTIC” section)
    FREQUENCY RANGE 47 ~ 63Hz
    POWER FACTOR (Typ.) PF>0.95/230VAC, PF>0.9/277VAC@full load (Please refer to “POWER FACTOR (PF) CHARACTERISTIC” section)
    TOTAL HARMONIC DISTORTION THD< 20%@load?75%/230VAC, 277VAC (Please refer to "TOTAL HARMONIC DISTORTION" section)
    EFFICIENCY (Typ.) 89% 87% 86% 86%
    AC CURRENT 0.4A/230VAC 0.3A/277VAC
    INRUSH CURRENT (Typ.) COLD START 30A(twidth=100?s measured at 50% Ipeak) at 230VAC; Per NEMA 410
    MAX. No. of PSUs on 16A CIRCUIT BREAKER 32 units (circuit breaker of type B) / 32 units (circuit breaker of type C) at 230VAC
    LEAKAGE CURRENT <0.75mA / 277VAC
    NO LOAD POWER CONSUMPTION <0.5W for Blank-Type, <1.2W for A-Type
    PROTECTION SHORT CIRCUIT Hiccup mode, re-power on to recovery
    ENVIRONMENT WORKING TEMP. Ta= -20 ~ +40? (ambient temperature)
    WORKING HUMIDITY 20 ~ 90% RH non-condensing
    STORAGE TEMP., HUMIDITY -40 ~ +80?, 10 ~ 95% RH
    TEMP. COEFFICIENT ±0.03%/? (0 ~ 40?)
    VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
    SAFETY & EMC SAFETY STANDARDS UL8750, CSA C22.2 NO.250.13-12; ENEC EN61347-1, EN61347-2-13, EN62384, GB19510.1,GB19510.14 approved
    WITHSTAND VOLTAGE I/P-O/P:3.75KVAC
    ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25?/ 70% RH
    EMC EMISSION Compliance to EN55015, EN61000-3-2 Class C (?75% load) ; EN61000-3-3,GB17743,GB17625.1
    EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level(surge immunity:Line-Line:1KV)
    OTHERS MTBF 380.7Khrs min. MIL-HDBK-217F (25?)
    DIMENSION 130*67.5*20.5mm(L*W*H)
    PACKING 0.15Kg; 81pcs/ 13Kg/ 1.46CUFT
    NOTE All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25? of ambient temperature. Please refer to “DRIVING METHODS OF LED MODULE”. De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details. Length of set up time is measured at cold first start. Turning ON/OFF the driver may lead to increase of the set up time or set up failure. There is no design of short circuit protection for the Auxiliary DC output; this function can not be used when dimming input terminals(DIM+,DIM-) are short circuit or when it is no load or short circuit at output(Vo+,Vo-). The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.