Mean Well Industrial Wall-Mounted Adapter – Level VI External Switching Power Supply

GE12
R.F.Q. (REQUEST FOR QUOTE)
Wattage 5W~60W
Features
  • Energy efficiency Level VI
  • No load power consumption <0.075W~0.15W
  • Comply with EISA 2007/DoE, NRCan, ErP and CoC Version 5
  • -30~+70oC working temperature
  • 2 pole USA plug(U type) / EURO plug(E type) / Interchangeable type for GE series
  • Slim design for SGA series
  • DC plug changeable (MOQ may be required)
  • 3 years warranty
Model No. Data Link Fixed GS05U-USB / GS05E-USB / GS06U / GS06E / GS15U / GS15E / GST18U / GST18E / GST25U / GST25E / GST36U / GST36E
Slim SGA12U / SGA12E / SGA18U / SGA18E / SGA25U / SGA25E / SGA40U / SGA40E / SGA60U / SGA60E
Interchangeable GE12 / GE18 / GE24 / GE30

For more information or to speak with a Power 277 professional please call toll free: (877) 878-2348 or for international calls (001) 702-987-3111.

You can download and/or view the PDF specifications for GS05U-USB / GS05E-USB / GS06U / GS06E / GS15U / GS15E / GST18U / GST18E / GST25U / GST25E / GST36U / GST36E / SGA12U / SGA12E / SGA18U / SGA18E / SGA25U / SGA25E / SGA40U / SGA40E / SGA60U / SGA60E / GE12 / GE18 / GE24 / GE30 above.

GS05U-USB Features:

5W AC-DC Industrial Adaptor

  • Universal AC input / Full range
  • 2 pole USA plug
  • No load power consumption <0.075W
  • Energy efficiency Level Ⅵ
  • Comply with EISA 2007/DoE
  • Compact size
  • Class II power (without earth pin)
  • Protections: Short circuit / Overload / Over voltage / Over temperature
  • Pass LPS
  • 100% full load burn-in test
  • Fully enclosed plastic case
  • Low cost, high reliability
  • 2 years warranty

 

ORDER NO. GS05U-USB
OUTPUT SAFETY MODEL NO. GS05U
DC VOLTAGE Note.2 5V
RATED CURRENT 1.00A
CURRENT RANGE 0 ~ 1.00A
RATED POWER 5W
RIPPLE & NOISE (max.) Note.3 90mVp-p
VOLTAGE TOLERANCE Note.4 ±4.0%
LINE REGULATION Note.5 ±1.0%
LOAD REGULATION Note.6 ±4.0%
SETUP, RISE, HOLD UP TIME 1500ms, 20ms, 15ms at full load
INPUT VOLTAGE RANGE 90 ~ 264VAC 127 ~ 370VDC
FREQUENCY RANGE 47 ~ 63Hz
EFFICIENCY (Typ.) 74%
AC CURRENT 0.15A / 100VAC
INRUSH CURRENT (max.) 35A / 230VAC
LEAKAGE CURRENT(max.) 0.25mA / 240VAC
PROTECTION OVERLOAD 105 ~ 135% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE 105 ~ 160% rated output voltage, detect on main control IC
Protection type : Hiccup mode, recovers automatically after fault condition is removed
OVER TEMPERATURE Shut down o/p voltage, recovers automatically after temperature goes down
ENVIRONMENT WORKING TEMP. -20 ~ +50?(Refer to “Derating curve”)
WORKING HUMIDITY 20% ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY -20 ~ +85?, 10 ~ 95% RH
TEMP. COEFFICIENT ±0.03% / ? (0 ~ 40?)
VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMC (Note. 7) SAFETY STANDARDS UL60950-1, CSA C22.2 approved
WITHSTAND VOLTAGE I/P-O/P:4242VDC
ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25?/ 70% RH
EMI CONDUCTION & RADIATION Compliance to FCC part 15 Class B
OTHERS MTBF 1100Khrs min. MIL-HDBK-217F(25?)
DIMENSION 41.86*32.76*23.8mm (L*W*H)
PACKING 26g ; 102pcs / 5Kg / CARTON
CONNECTOR PLUG USB Type A
NOTE 1.All parameters are specified at 115VAC input, rated load, 25? 70% RH ambient. 2.DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3.Ripple & noise are measured at 20MHz by using a 12″ twisted pair terminated with a 0.1uf & 47uf capacitor. 4.Tolerance: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 6.Load regulation is measured from 0% to 100% rated load 7.The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com)