Mean Well On Board Type DC/DC Converter

NSD15
R.F.Q. (REQUEST FOR QUOTE)
Wattage 5W~60W
Features
  • On board PCB type, assemble on the main PCB of the system
  • Ultra-low profile
  • 3:1 ~ 4:1 wide input range
  • Non-isolated for NID series
Model No. Data Link NSD05 / NSD10-S / NSD10-D / NSD15-S / NSD15-D / NID30 / NID60

For more information or to speak with a Power 277 professional please call toll free: (877) 878-2348 or for international calls (001) 702-987-3111.

You can download and/or view the PDF specifications for NSD05 / NSD10-S / NSD10-D / NSD15-S / NSD15-D / NID30 / NID60 above.

NSD05-S Series Features:

5W DC-DC Regulated Single Output

  • Wide 4:1 DC input range
  • Protections: Short circuit / Overload / Over voltage
  • 1000VDC 1/O isolation
  • Cooling by free air convection
  • Built-in remote ON-OFF contro
  • 100% full load burn-in test
  • Low cost
  • High reliability
  • 2 years warranty
MODEL NSD05-12S3 NSD05-12S5 NSD05-12S12 NSD05-12S15 NSD05-48S3 NSD05-48S5 NSD05-48S12 NSD05-48S15
OUTPUT DC VOLTAGE 3.3V 5V 12V 15V 3.3V 5V 12V 15V
RATED CURRENT 1.2A 1A 0.42A 0.33A 1.2A 1A 0.42A 0.33A
CURRENT RANGE 0 ~ 1.2A 0 ~ 1A 0 ~ 0.42A 0 ~ 0.33A 0 ~ 1.2A 0 ~ 1A 0 ~ 0.42A 0 ~ 0.33A
RATED POWER 3.96W 5W 5.04W 4.95W 3.96W 5W 5.04W 4.95W
CAPACITIVE LOAD (max.) 1000uF 1000uF 120uF 120uF 1000uF 1000uF 120uF 120uF
RIPPLE & NOISE (max.) Note.2 75mVp-p
VOLTAGE TOLERANCE Note.3 ±2.0% max.
LINE REGULATION ±1.0%
LOAD REGULATION ±2.0% ±1.0% ±1.0% ±1.0% ±2.0% ±1.0% ±1.0% ±1.0%
SETUP TIME 80ms/RATED DC INPUT at full Load
INPUT RATED DC INPUT 12VDC 48VDC
VOLTAGE RANGE 9.2 ~ 36VDC 18 ~ 72VDC
EFFICIENCY (Typ.) 72% 76% 82% 83% 75% 78% 83% 85%
DC CURRENT 0.7A/12VDC 0.2A/48VDC
SHUTDOWN IDLE CURRENT 5mA/12VDC 5mA/48VDC
PROTECTION OVERLOAD Above 105% rated output power
Protection type : Over power limiting, recovers automatically after fault condition is removed
OVER VOLTAGE(CLAMP) 3.8 ~ 4.6V 5.6 ~ 6.8V 13.5 ~ 16.5V 16.2 ~ 19.8V 3.8 ~ 4.6V 5.6 ~ 6.8V 13.5 ~ 16.5V 16.2 ~ 19.8V
SHORT CIRCUIT Recovers automatically after fault condition is removed
FUNCTION ON/OFF CONTROL Logic “1” or open circuit : ON Logic “0” or short to PIN2 : OFF
ENVIRONMENT WORKING TEMP. -25 ~ +70?
WORKING HUMIDITY 0% ~ 95% RH max.
STORAGE TEMP., HUMIDITY -40 ~ +85?, 0 ~ 95% RH
TEMP. COEFFICIENT ±0.03%/? (0~60?)
SAFETY & EMC (Note 4) SAFETY STANDARDS IEC60950-1 CB approved by TUV
ISOLATION VOLTAGE I/P-O/P:1KVDC
ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25?/ 70% RH
EMC EMISSION Compliance to EN55022 (CISPR22) Class B
EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8; EN55024, light industry level, criteria A
OTHERS MTBF 914.4K hrs min. MIL-HDBK-217F (25?)
DIMENSION 40.6*25.4*8.3mm (1.6″*1″*0.327″) (L*W*H)
PACKING 0.007Kg; 700pcs/5.9Kg/0.97CUFT
NOTE All parameters NOT specially mentioned are measured at 12, 48VDC input, rated load and 25? of ambient temperature. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. Tolerance : includes set up tolerance, line regulation and load regulation. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 230mm*230mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EM1 testing of component power supplies.” (as available on http://www.meanwell.com) To insure proper operation, a 47uF/100V electrolytic capacitor with Esr <1? must be added to the input line. 6.EMC filter suggestion(TBD): 5.5uH + + + Vin 680uF PSU Vo - -