Mean Well Enclosed Type DC/DC Converter

R.F.Q. (REQUEST FOR QUOTE)

Wattage	15W~1000W
Features	DC/DC converter with metal chassis Comply with EN50155 railway certificate for RSD family CE declaration Suitable for battery backup system or transportation vehicle
Model No. Data Link	SD-15 / SD-25 / SD-50 / SD-100 / SD-150 / SD-200 / SD-350 / SD-500 / SD-1000 / RSD-30 / RSD-60 /RSD-100 / RSD-150 / RSD-200 / RSD-300

For more information or to speak with a Power 277 professional please call toll free: (877) 878-2348 or for international calls (001) 702-987-3111.

You can download and/or view the PDF specifications for SD-15 / SD-25 / SD-50 / SD-100 / SD-150 / SD-200 / SD-350 / SD-500 / SD-1000 / RSD-100 / RSD-150 / RSD-200 / RSD-300 above.

SD-15 Series Features:

15W Single Output DC-DC Converter

2:1 wide input range
Protections: Short circuit/Over load /voltage
Built-in EMI filter, low ripple noise
100% full load burn-in test
Low cost
High Reliability
2 year warranty

MODEL		SD-15A-05	SD-15B-05	SD-15C-05	SD-15A-12	SD-15B-12	SD-15C-12	SD-15A-24 SD-15B-24		SD-15C-24
OUTPUT	DC VOLTAGE	5V			12V			24V
	RATED CURRENT	3A			1.25A			0.625A
	CURRENT RANGE	0 ~ 3A			0 ~ 1.25A			0 ~ 0.625A
	RATED POWER	15W			15W			15W
	RIPPLE & NOISE (max.) Note.2	100mVp-p			120mVp-p			150mVp-p
	VOLTAGE ADJ.RANGE	4.75~5.5VDC			10.8~13.2VDC			21.6~26.4VDC
	VOLTAGE TOLERANCE Note.3	±2.0%			±1.0%			±1.0%
	LINE REGULATION	±0.5%			±0.3%			±0.2%
	LOAD REGULATION	±0.5%			±0.3%			±0.2%
	SETUP, RISE ,HOLD UP TIME	2.5s, 25ms,— 12VDC/24VDC/48VDC at full load
INPUT	VOLTAGE RANGE	A: 9.2 ~18VDC B:18 ~ 36VDC C:36~72VDC
	EFFICIENCY(Typ.)	68%	76%	75%	72%	76%	79%	70%	77%	78%
	DC CURRENT(Typ.)	1.9A/12VDC 0.9A/24VDC 0.45A/48VDC
PROTECTION	OVER LOAD	105 ~160% rated output power
		Protection type : Hiccup mode, recovers automatically after fault condition is removed
	OVER VOLTAGE	5.75 ~ 6.75V			13.8~ 16.2V			27.6 ~ 32.4V
		Protection type : Shut off o/p voltage, clamping by zener diode
ENVIRONMENT	WORKING TEMP.	-10 ~ +60? (Refer to “Derating Curve”)
	WORKING HUMIDITY	20 ~ 90% RH non-condensing
	STORAGE TEMP., HUMIDITY	-20 ~ +85?, 10 ~ 95% RH
	TEMP. COEFFICIENT	±0.03%/? (0 ~ 50?)
	VIBRATION	10 ~ 500Hz, 2G 10min./1cycle, 60min.each along X, Y, Z axes
SAFETY & EMC (Note 4)	WITHSTAND VOLTAGE	I/P-O/P:1.5KVAC I/P-FG:1KVAC O/P-FG:0.5KVAC
	ISOLATION RESISTANCE	I/P-O/P,I/P-FG,O/P-FG:100M Ohms / 500VDC / 25?/ 70% RH
	EMC EMISSION	Compliance to EN55022(CISPR22)
	EMC IMMUNITY	Compliance to EN61000-4-2,3,4,6,8, EN55024, light industry level, criteria A
OTHERS	MTBF	644.2K hrs min.(SD-15A) 652.5K hrs min.(SD-15B) 653.5K Hrs min.(SD-15C) MIL-HDBK-217F (25?)
	DIMENSION	785128mm (LWH)
	PACKING	0.18Kg,60 PCS/11.8Kg
NOTE	All parameters NOT specially mentioned are measured at normal input, rated load and 25°C of ambient temperature. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. Tolerance: includes set up tolerance, line regulation and load regulation. The power supply is considered a component which will be installed into final equipment. All the EMC tests have been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how toperform these EMC tests, please refer to “EMI testing of component power supplies.” (available on http://www.meanwell.com)

Mean Well Power Supply Stocking Warehouse

SD-15 Series Features: