Mean Well Industrial Desktop Adapter – Level VI External Switching Power Supply

Wattage 15W~280W
Features
  • Energy efficiency Level VI
  • No load power consumption <0.075W~0.5W
  • Comply with EISA 2007/DoE, NRCan, MEPS, ErP and CoC Version 5
  • Fanless design with -30~+70oC working temperature
  • A type: Class I (with FG), equipped IEC320-C14 B type: Class II (without FG), equipped IEC320-C8
  • DC plug changeable (MOQ may be required)
  • 3 years warranty
Model No. Data Link Single GS15A / GS15B / GST18A / GST18B / GST25A / GST25B / GST36B / GST40A / GST60A / GST90A / GST120A / GST160A / GST220A / GST280A
Triple GP25A / GP25B / GP50A

For more information or to speak with a Power 277 professional please call toll free: (877) 878-2348 or for international calls (001) 702-987-3111.

You can download and/or view the PDF specifications for GS15A / GS15B / GST18A / GST18B / GST25A / GST25B / GST36B / GST40A / GST60A / GST90A / GST120A / GST160A / GST220A / GST280A / GP25A / GP25B / GP50A above.

GS15A Series Features:

15W AC-DC Industrial Adaptor

  • Universal AC input / Full range
  • 3 pole AC inlet IEC320-C14
  • No load power consumption <0.075W
  • Energy efficiency Level Ⅵ
  • Comply with EISA 2007/DoE, EU ErP and meet CoC version 5
  • Class I power ( with earth pin)
  • Protections: Short circuit / Overload / Over voltage
  • Pass LPS
  • Fully enclosed plastic case
  • 2 years warranty

 

ORDER NO. GS15A-1P1J GS15A-11P1J GS15A-2P1J GS15A-3P1J GS15A-4P1J GS15A-5P1J GS15A-6P1J GS15A-8P1J
OUTPUT SAFETY MODEL NO. GS15A-1 GS15A-1-1 GS15A-2 GS15A-3 GS15A-4 GS15A-5 GS15A-6 GS15A-8
DC VOLTAGE Note.2 5V 7.5V 9V 12V 15V 18V 24V 48V
RATED CURRENT 2.40A 1.60A 1.66A 1.25A 1.00A 0.83A 0.625A 0.31A
CURRENT RANGE 0 ~ 2.40A 0 ~ 1.60A 0 ~1.66A 0 ~ 1.25A 0 ~ 1.00A 0 ~ 0.83A 0 ~ 0.625A 0 ~ 0.31A
RATED POWER 12W 12W 15W 15W 15W 15W 15W 15W
RIPPLE & NOISE (max.) Note.3 50mVp-p 80mVp-p 80mVp-p 80mVp-p 100mVp-p 120mVp-p 150mVp-p 240mVp-p
VOLTAGE TOLERANCE Note.4 ±5.0% ±5.0% ±5.0% ±3.0% ±3.0% ±3.0% ±2.0% ±2.0%
LINE REGULATION Note.5 ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5%
LOAD REGULATION Note.6 ±5.0% ±5.0% ±5.0% ±3.0% ±3.0% ±3.0% ±2.0% ±2.0%
SETUP, RISE, HOLD UP TIME 3000ms, 50ms, 16ms at full load
INPUT VOLTAGE RANGE 90 ~ 264VAC 135 ~ 370VDC
FREQUENCY RANGE 47 ~ 63Hz
EFFICIENCY (Typ.) 80% 82.5% 85% 85% 85% 85% 85.5% 87%
AC CURRENT 0.5A / 100VAC
INRUSH CURRENT (max.) 50A / 230VAC
LEAKAGE CURRENT(max.) 0.25mA / 240VAC
PROTECTION OVERLOAD 105 ~ 250% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE >120% rated output voltage
Protection type : Clamp by zener diode
ENVIRONMENT WORKING TEMP. 0 ~ +50? (Refer to “Derating Curve”)
WORKING HUMIDITY 20% ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY -20 ~ +85?, 10 ~ 95% RH
TEMP. COEFFICIENT ±0.03% / ? (0 ~ 40?)
VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMC (Note. 7) SAFETY STANDARDS UL60950-1, CSA C22.2, TUV EN60950-1 approved
WITHSTAND VOLTAGE I/P-O/P:3KVAC , I/P-FG:1.5KVAC
ISOLATION RESISTANCE I/P-O/P, I/P-FG:100M Ohms / 500VDC / 25?/ 70% RH
EMC EMISSION Compliance to EN55022 Class B, EN61000-3-2,3, FCC part 15 Class B
EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,11, light industry level, criteria A
OTHERS MTBF 500Khrs min. MIL-HDBK-217F(25?)
DIMENSION 100*58.5*32.8mm (L*W*H)
PACKING 190g ; 90pcs / 18Kg / CARTON
CONNECTOR PLUG See page 2 ; Other type available by customer requested
CABLE See page 2 ; Other type available by customer requested
NOTE 1.All parameters are specified at 230VAC input, rated load, 25? 70% RH ambient. 2.DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3.Ripple & noise are measured at 20MHz by using a 12″ twisted pair terminated with a 0.1uf & 47uf capacitor. 4.Tolerance: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 6.Load regulation is measured from 0% to 100% rated load. 7.The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com)

 

GS15A Specification Image

GS15A Specification Image