Toll Free: 
Mean Well Power Supply Stocking Warehouse
| Wattage | 5W~45W |
|---|---|
| Features |
|
| Model No. Data Link | PSD-05 / PSD-15 / PSD-30 / PSD-45 |
For more information or to speak with a Power 277 professional please call toll free: (877) 878-2348 or for international calls (001) 702-987-3111.
You can download and/or view the PDF specifications for PSD-05 / PSD-15 / PSD-30 / PSD-45 above.
PSD-05 Series Features:
5W Single Output DC-DC Converter
- 2:1 wide input range
- Protections:Short circuit/Over load /Over voltage/Over temperature
- Built-in EMI filter, low ripple noise
- 100% full load burn-in test
- Fix switching frequency at 67KHz
- High reliability 2 year warranty
- Low cost
| MODEL | PSD-05-05 | PSD-05-12 | PSD-05-24 | |
| OUTPUT | DC VOLTAGE | 5V | 12V | 24V |
| RATED CURRENT | 1A | 0.45A | 0.22A | |
| CURRENT RANGE | 0 ~ 1A | 0 ~ 0.5A | 0 ~ 0.25A | |
| RATED POWER | 5W | 5.4W | 5.28W | |
| RIPPLE & NOISE (max.) Note.2 | 50mVp-p | 100mVp-p | 150mVp-p | |
| VOLTAGE TOLERANCE Note.3 | ±2.0% | ±2.0% | ±2.0% | |
| LINE REGULATION | ±1.0% | ±1.0% | ±0.5% | |
| LOAD REGULATION | ±1.0% | ±1.0% | ±0.5% | |
| SETUP, RISE, HOLD UP TIME | 1.2s, 20ms,— at full load | |||
| INPUT | VOLTAGE RANGE | 36 ~ 72VDC | ||
| EFFICIENCY(Typ.) | 75% | 78% | 78% | |
| DC CURRENT(Typ.) | 0.15A/48V | |||
| PROTECTION | OVERLOAD | Above 105% rated output power | ||
| Protection type : Fold back current limiting, recovery automatically after fault condition is removed | ||||
| OVER VOLTAGE | 5.75~ 6.75V | 13.8~16.2V | 27.6~ 32.4V | |
| Protection type : Hiccup mode, recovery automatically after fault condition is removed | ||||
| OVER TEMPERATURE | Hiccup mode, recovery automatically after temperature goes down | |||
| ENVIRONMENT | WORKING TEMP. | -10 ~ +60? (Refer to “Derating Curve”) | ||
| WORKING HUMIDITY | 20 ~ 90% RH non-condensing | |||
| STORAGE TEMP., HUMIDITY | -20 ~ +85?, 10 ~ 95% RH | |||
| TEMP. COEFFICIENT | ±0.05%/? (0 ~ 50?) | |||
| VIBRATION | 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes | |||
| SAFETY & EMC (Note 4) | WITHSTAND VOLTAGE | I/P-O/P:1.5KVAC | ||
| ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25?/ 70% RH | |||
| EMI CONDUCTION & RADIATION | Compliance to EN55022 (CISPR22) Class B | |||
| EMS IMMUNITY | Compliance to EN61000-4-2, 3, 4, 6, 8 ENV50204, EN55024, EN61000-6-1, light industry level, criteria A | |||
| OTHERS | DIMENSION | 75*40*20mm (L*W*H) | ||
| PACKING | 50mg;120pcs/6.25Kg/1CUFT | |||
| NOTE | All parameters NOT specially mentioned are measured at 48VDC input, rated load and 25? of ambient temperature. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. Tolerance : includes set up tolerance, line regulation and load regulation. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 230mm*230mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com) | |||