Posted on December 11, 2016 by BrandonF01 - Uncategorized
For more information or to speak with a Power 277 professional please call toll free: (877) 878-2348 or for international calls (001) 702-987-3111.
Mean Well IDLC / IDPC-65 Series General Description
Once the 45W IDLC-45 and IDPC-45 series which with flicker free design of MEAN WELL are released to the market, they have become popular and widely adopted by indoor LED lighting system designers that MEAN WELL decides to raise the output wattage from 45W to 65W and is pleased to unveil the 65W IDLC-65 (plastic housing) and IDPC-65 (PCB type) series.
In order to meet the design and the installation requirements of the indoor luminaires, these two series adopt co-design work (like IDLC-45 and IDPC-45 series) that the differences are merely in the appearance and the mechanism. They both have the same electrical specifications like accepting 180~295VAC input, with built-in active PFC function, providing various models with 700mA/1050mA/1400mA/1750mA constant current output and the highest working efficiency up to 89%. They are compliant with UL8750, ENEC EN61347-1,-2-13 and GB19510.1, .14 international safety regulations of LED lighting. The standard product has a built-in 2 in 1 dimming function (12V/50mA auxiliary output are also offered for A-Type models) that the LED luminaire system manufacturers can take advantage of higher flexibility while planning the layout. These two series are very suitable to be applied to the indoor LED luminaires requiring flicker free and low power consumption, such as LED panel lighting and LED flood lighting.
Mean Well IDLC / IDPC-65 Series Features
- 180~295VAC input only
- Flicker free design
- Class II design, no F.G
- Built-in active PFC function
- Built-in 2 in 1 dimming function (0~10VDC or PWM signal)
- 12V/50mA auxiliary output (A-Type)
- No load power consumption: Blank-Type < 0.5W, A-Type <1.2W
- Protections: Short circuit
- Working temperature—IDLC:-20~+85℃(Tcase), IDPC:-20~+40℃(Ta)
- Comply with UL/CUL/ENEC/CB/CCC/CE
- Dimension (L x W x H)—IDLC: 130 x 75 x 25 mm,IDPC: 130 x 67.5 x 20.5 mm
- 3 years warranty
-
Mean Well IDLC-65 LED Driver Specifications
Mean Well IDLC-65 LED Driver Description
IDLC-65 series is a 65W LED AC/DC driver featuring the constant current mode output with flicker free design. IDLC-65 operates from 180-295VAC and offers models with different rated current ranging between 700mA and 1750mA. Thanks to the high efficiency up to 89%, with the fanless design, the entire series is able to operate for -20℃-+85℃ case temperature under free air convection.
IDLC-65 is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for lighting system.
Mean Well IDLC-65 LED Driver Features:
- Constant Current mode output
- Flicker free design
- Plastic housing with class II design
- Built-in active PFC function
- No load power consumption<0.5W(Blank-Type)
- Function options: 2 in 1 dimming (dim-to-off); Auxiliary DC output
- 3 years warranty
Specifications
MODEL |
IDLC-65 -700 |
IDLC-65 -1050 |
IDLC-65 -1400 |
IDLC-65 -1750 |
OUTPUT |
RATED CURRENT |
700mA |
1050mA |
1400mA |
1750mA |
RATED POWER |
65.1W |
65.1W |
64.4W |
63W |
CONSTANT CURRENT REGION Note.2 |
69 ~ 93V |
46 ~ 62V |
34 ~ 46V |
27 ~ 36V |
OPEN CIRCUIT VOLTAGE(max.) |
118V |
82V |
60V |
53V |
CURRENT RIPPLE |
5% max. @rated current |
CURRENT TOLERANCE |
±7.0% |
SETUP TIME Note.4 |
500ms / 230VAC |
AUXILIARY DC OUTPUT Note.5 |
Nominal 12V(deviation 11.4~12.6)@50mA for A-Type only |
INPUT |
VOLTAGE RANGE Note.3 |
180 ~ 295VAC 254 ~ 417VDC (Please refer to “STATIC CHARACTERISTIC” section) |
FREQUENCY RANGE |
47 ~ 63Hz |
POWER FACTOR (Typ.) |
PF>0.95/230VAC, PF>0.9/277VAC@full load (Please refer to “POWER FACTOR (PF) CHARACTERISTIC” section) |
TOTAL HARMONIC DISTORTION |
THD< 20%@load?75%/230VAC,277VAC (Please refer to "TOTAL HARMONIC DISTORTION" section) |
EFFICIENCY (Typ.) |
89% |
87% |
86% |
86% |
AC CURRENT |
0.4A/230VAC 0.3A/277VAC |
INRUSH CURRENT (Typ.) |
COLD START 30A(twidth=100?s measured at 50% Ipeak) at 230VAC; Per NEMA 410 |
MAX. No. of PSUs on 16A CIRCUIT BREAKER |
32 units (circuit breaker of type B) / 32 units (circuit breaker of type C) at 230VAC |
LEAKAGE CURRENT |
<0.75mA / 277VAC |
NO LOAD POWER CONSUMPTION |
<0.5W for Blank-Type, <1.2W for A-Type |
PROTECTION |
SHORT CIRCUIT |
Hiccup mode, re-power on to recovery |
ENVIRONMENT |
WORKING TEMP. |
Tcase=-20 ~ +85? (Please refer to ” OUTPUT LOAD vs TEMPERATURE” section) |
MAX. CASE TEMP. |
Tcase=+85? |
WORKING HUMIDITY |
20 ~ 90% RH non-condensing |
STORAGE TEMP., HUMIDITY |
-40 ~ +80?, 10 ~ 95% RH |
TEMP. COEFFICIENT |
±0.03%/? (0 ~ 40?) |
VIBRATION |
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes |
SAFETY & EMC |
SAFETY STANDARDS |
UL8750;CSA C22.2 NO.250.13-12; ENEC EN61347-1 & EN61347-2-13 independent, EN62384, GB19510.1,GB19510.14 approved |
WITHSTAND VOLTAGE |
I/P-O/P:3.75KVAC |
ISOLATION RESISTANCE |
I/P-O/P:100M Ohms / 500VDC / 25?/ 70% RH |
EMC EMISSION |
Compliance to EN55015, EN61000-3-2 Class C (?75% load) ; EN61000-3-3,GB17743,GB17625.1 |
EMC IMMUNITY |
Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level(surge immunity:Line-Line:1KV) |
OTHERS |
MTBF |
380.7Khrs min. MIL-HDBK-217F (25?) |
DIMENSION |
130*75*25mm(L*W*H) |
PACKING |
0.23Kg; 54pcs/ 13.5Kg/ 0.96CUFT |
NOTE |
All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25? of ambient temperature. Please refer to “DRIVING METHODS OF LED MODULE”. De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details. Length of set up time is measured at cold first start. Turning ON/OFF the driver may lead to increase of the set up time or set up failure. There is no design of short circuit protection for the Auxiliary DC output; this function can not be used when dimming input terminals(DIM+,DIM-) are short circuit or when it is no load or short circuit at output(Vo+,Vo-). The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. |
-
Mean Well IDPC-65 LED Driver Specifications
Mean Well IDPC-65 LED Driver Description
IDPC-65 series is a 65W PCB type LED AC/DC driver featuring the constant current mode output with flicker free design. IDPC-65 operates from 180-295VAC and offers models with different rated current ranging between 700mA and 1750mA. Thanks to the efficiency up to 89%, with the fanless design, the entire series is able to operate for -20℃-+40℃ ambient temperature under free air convection.
IDPC-65 is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for lighting system.
Mean Well IDPC-65 LED Driver Features:
- Constant Current mode output
- Flicker free design
- Plastic housing with class II design
- Built-in active PFC function
- No load power consumption<0.5W(Blank-Type)
- Function options: 2 in 1 dimming (dim-to-off); Auxiliary DC output
- 3 years warranty
Mean Well IDPC-65 LED Driver Specifications
MODEL |
IDPC-65 -700 |
IDPC-65 -1050 |
IDPC-65 -1400 |
IDPC-65 -1750 |
OUTPUT |
RATED CURRENT |
700mA |
1050mA |
1400mA |
1750mA |
RATED POWER |
65.1W |
65.1W |
64.4W |
63W |
CONSTANT CURRENT REGION Note.2 |
69 ~ 93V |
46 ~ 62V |
34 ~ 46V |
27 ~ 36V |
OPEN CIRCUIT VOLTAGE(max.) |
118V |
82V |
60V |
53V |
CURRENT RIPPLE |
5% max. @rated current |
CURRENT TOLERANCE |
±7.0% |
SETUP TIME Note.4 |
500ms / 230VAC |
AUXILIARY DC OUTPUT Note.5 |
Nominal 12V(deviation 11.4~12.6)@50mA for A-Type only |
INPUT |
VOLTAGE RANGE Note.3 |
180 ~ 295VAC 254 ~ 417VDC (Please refer to “STATIC CHARACTERISTIC” section) |
FREQUENCY RANGE |
47 ~ 63Hz |
POWER FACTOR (Typ.) |
PF>0.95/230VAC, PF>0.9/277VAC@full load (Please refer to “POWER FACTOR (PF) CHARACTERISTIC” section) |
TOTAL HARMONIC DISTORTION |
THD< 20%@load?75%/230VAC, 277VAC (Please refer to "TOTAL HARMONIC DISTORTION" section) |
EFFICIENCY (Typ.) |
89% |
87% |
86% |
86% |
AC CURRENT |
0.4A/230VAC 0.3A/277VAC |
INRUSH CURRENT (Typ.) |
COLD START 30A(twidth=100?s measured at 50% Ipeak) at 230VAC; Per NEMA 410 |
MAX. No. of PSUs on 16A CIRCUIT BREAKER |
32 units (circuit breaker of type B) / 32 units (circuit breaker of type C) at 230VAC |
LEAKAGE CURRENT |
<0.75mA / 277VAC |
NO LOAD POWER CONSUMPTION |
<0.5W for Blank-Type, <1.2W for A-Type |
PROTECTION |
SHORT CIRCUIT |
Hiccup mode, re-power on to recovery |
ENVIRONMENT |
WORKING TEMP. |
Ta= -20 ~ +40? (ambient temperature) |
WORKING HUMIDITY |
20 ~ 90% RH non-condensing |
STORAGE TEMP., HUMIDITY |
-40 ~ +80?, 10 ~ 95% RH |
TEMP. COEFFICIENT |
±0.03%/? (0 ~ 40?) |
VIBRATION |
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes |
SAFETY & EMC |
SAFETY STANDARDS |
UL8750, CSA C22.2 NO.250.13-12; ENEC EN61347-1, EN61347-2-13, EN62384, GB19510.1,GB19510.14 approved |
WITHSTAND VOLTAGE |
I/P-O/P:3.75KVAC |
ISOLATION RESISTANCE |
I/P-O/P:100M Ohms / 500VDC / 25?/ 70% RH |
EMC EMISSION |
Compliance to EN55015, EN61000-3-2 Class C (?75% load) ; EN61000-3-3,GB17743,GB17625.1 |
EMC IMMUNITY |
Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level(surge immunity:Line-Line:1KV) |
OTHERS |
MTBF |
380.7Khrs min. MIL-HDBK-217F (25?) |
DIMENSION |
130*67.5*20.5mm(L*W*H) |
PACKING |
0.15Kg; 81pcs/ 13Kg/ 1.46CUFT |
NOTE |
All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25? of ambient temperature. Please refer to “DRIVING METHODS OF LED MODULE”. De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details. Length of set up time is measured at cold first start. Turning ON/OFF the driver may lead to increase of the set up time or set up failure. There is no design of short circuit protection for the Auxiliary DC output; this function can not be used when dimming input terminals(DIM+,DIM-) are short circuit or when it is no load or short circuit at output(Vo+,Vo-). The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. |
Posted on December 11, 2016 by BrandonF01 - Uncategorized
ODLC-45/65 Series General Introduction
Soon after two flicker free design indoor LED drivers, the IDLC family (plastic housing type) and the IDPC family (PCB board type) are released to the market, MEAN WELL keeps working on enlarging the product line of flicker free function and is pleased to unveil the new ODLC family (cable type) ~ ODLC-45(45W)/65(65W) series.
This product is the co-design work with IDLC and IDPC family— they all adopt constant current output mode, equipped with built-in active PFC function, offer the same electrical specifications for models with identical output wattage, operate with the up to 86% highest working efficiency and comply with UL8750, ENEC EN61347-1,-2-13 and GB19510.1, .14 international safety regulations of LED lighting. The standard product has a built-in 2 in 1 dimming function (the models with12V/50mA auxiliary output are also offered) that give LED luminaire system designers higher flexibility while planning the layout. This product is very suitable to be applied to the indoor LED luminaires requiring flicker free and low power consumption, such as LED panel lighting and LED flood lighting.
ODLC-45/65 Series General Features
- Input range—45W: 90~295VAC, 65W: 180~295VAC
- Flicker free design
- Class II design, no F.G.
- Built-in active PFC function
- Built-in 2 in 1 dimming function (0~10VDC or 10V PWM signal)
- Offer models with built-in 12V/50mA auxiliary output (A-Type)
- No load power consumption: Blank-Type < 0.5W, A-Type <1.2W
- Working temperature: -20~+85℃(Tcase)
- Protections: Short circuit
- Comply with UL/CUL/ENEC/CB/CCC/CE
- Dimension (L x W x H)— 45W: 111 x 77 x 28.5 mm, 65W: 121 x 77 x 28.5 mm
- 3 years warranty
-
Mean Well ODLC-45 LED Driver
ODLC-45 LED Driver Description
ODLC-45 series is a 45W LED AC/DC driver featuring the constant current mode output with flicker free design.ODLC-45 operates from 90-295VAC and offers models with different rated current ranging between 350mA and 1400mA. Thanks to the efficiency up to 86%, with the fanless design, the entire series is able to operate for -20℃-+85℃ case temperature under free convection. The design of plastic housing and IP67 ingress protection level allows this series to fit indoor wet applications. ODLC-45 is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for lighting system.
Features:
- Constant Current mode output
- Flicker free design
- Plastic housing with class II design
- Built-in active PFC function
- No load power consumption<0.5W(Blank-Type)
- IP67 rating for indoor or outdoor installations
- Function options: 2 in 1 dimming (dim-to-off); Auxiliary DC output
- 3 years warranty
- LED panel lighting
- LED flood lighting
- Indoor LED lighting
Specification
MODEL |
ODLC-45 -350 |
ODLC-45 -500 |
ODLC-45 -700 |
ODLC-45 -1050 |
ODLC-45 -1400 |
OUTPUT |
RATED CURRENT |
350mA |
500mA |
700mA |
1050mA |
1400mA |
RATED POWER |
33.25W |
45W |
44.8W |
45.15W |
44.8W |
CONSTANT CURRENT REGION Note.2 |
57 ~ 95V |
54 ~ 90V |
38 ~ 64V |
26 ~ 43V |
19 ~ 32V |
OPEN CIRCUIT VOLTAGE(max.) |
118V |
115V |
84V |
63V |
50V |
CURRENT RIPPLE |
5% max. @rated current |
CURRENT TOLERANCE |
±7.0% |
SETUP TIME Note.4 |
500ms / 230VAC 1200ms/115VAC |
AUXILIARY DC OUTPUT Note.5 |
Nominal 12V(deviation 11.4~12.6)@50mA for A-Type only |
INPUT |
VOLTAGE RANGE Note.3 |
90 ~ 295VAC 127 ~ 417VDC (Please refer to “STATIC CHARACTERISTIC” section) |
FREQUENCY RANGE |
47 ~ 63Hz |
POWER FACTOR (Typ.) |
PF>0.95/115VAC, PF>0.92/230VAC, PF>0.9/277VAC@full load (Please refer to “POWER FACTOR (PF) CHARACTERISTIC” section) |
TOTAL HARMONIC DISTORTION |
THD< 20%(@load?60%/230VAC; @load?75%/277VAC) (Please refer to "TOTAL HARMONIC DISTORTION" section) |
EFFICIENCY (Typ.) |
86% |
85% |
85% |
84% |
83% |
AC CURRENT |
0.6A/115VAC 0.4A/230VAC 0.3A/277VAC |
INRUSH CURRENT (Typ.) |
COLD START 30A(twidth=100?s measured at 50% Ipeak) at 230VAC; Per NEMA 410 |
MAX. No. of PSUs on 16A CIRCUIT BREAKER |
32 units (circuit breaker of type B) / 32 units (circuit breaker of type C) at 230VAC |
LEAKAGE CURRENT |
<0.75mA / 277VAC |
NO LOAD POWER CONSUMPTION |
<0.5W for Blank-Type |
PROTECTION |
SHORT CIRCUIT |
Hiccup mode, recovers automatically after fault condition is removed |
ENVIRONMENT |
WORKING TEMP. |
Tcase=-20 ~ +85? (Please refer to ” OUTPUT LOAD vs TEMPERATURE” section) |
MAX. CASE TEMP. |
Tcase=+85? |
WORKING HUMIDITY |
20 ~ 90% RH non-condensing |
STORAGE TEMP., HUMIDITY |
-40 ~ +80?, 10 ~ 95% RH |
TEMP. COEFFICIENT |
±0.03%/? (0 ~ 40?) |
VIBRATION |
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes |
SAFETY & EMC |
SAFETY STANDARDS |
UL8750(type”HL”),CSA C22.2 NO.250.13-12;ENEC EN61347-1 & EN61347-2-13 independent, EN62384,GB19510.1,GB19510.14; IP67 approved |
WITHSTAND VOLTAGE |
I/P-O/P:3.75KVAC |
ISOLATION RESISTANCE |
I/P-O/P:100M Ohms / 500VDC / 25?/ 70% RH |
EMC EMISSION |
Compliance to EN55015, EN61000-3-2 Class C (@load?60%) ; EN61000-3-3,GB17743,GB17625.1 |
EMC IMMUNITY |
Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level(surge immunity:Line-Line:1KV) |
OTHERS |
MTBF |
408.8Khrs min. MIL-HDBK-217F (25?) |
DIMENSION |
111*77*28.5mm(L*W*H) |
PACKING |
0.42Kg; 24pcs/ 11Kg/ 0.72CUFT |
NOTE |
All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25? of ambient temperature. Please refer to “DRIVING METHODS OF LED MODULE”. De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details. Length of set up time is measured at cold first start. Turning ON/OFF the driver may lead to increase of the set up time. There is no design of short circuit protection for the Auxiliary DC output; this function can not be used when dimming input terminals(DIM+,DIM-) are short circuit or when it is no load or short circuit at output(Vo+,Vo-). The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. |
-
Mean Well ODLC-65 LED Driver
ODLC-65 Description
ODLC-65 series is a 65W LED AC/DC driver featuring the constant current mode output with flicker free design. ODLC-65 operates from 180-295VAC and offers models with different rated current ranging between 700mA and 1750mA. Thanks to the efficiency up to 88%, with the fanless design, the entire series is able to operate for -20℃-+85℃ case temperature under free convection. The design of plastic housing and IP67 ingress protection level allows this series to fit indoor wet applications. ODLC-65 is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for lighting system.
Features:
- Constant Current mode output
- Flicker free design
- Plastic housing with class II design
- Built-in active PFC function
- No load power consumption <0.5W(Blank-Type)
- IP67 rating for indoor or outdoor installations
- Function options : 2 in 1 dimming (dim-to-off); Auxiliary DC output
- 3 years warranty
Posted on July 8, 2016 by BrandonF01 - Uncategorized
For more information or to speak with a Power 277 professional please call toll free: (877) 878-2348 or for international calls (001) 702-987-3111.
You can download and/or view the PDF specifications for TS-200 / TS-400 / TS-700 / TS-1000 / TS-1500 / TS-3000 TN-1500 / TN-3000 IRC1 / IRC2 / IRC3 above.
TS-700 Series
700W True Sine Wave DC-AC Power Inverter Features:
- True sine wave output (THD<3%)
- High surge power up to 1400W
- Standby saving mode can be selectable
- Front panel indicator for operation status
- Built-in fan ON-OFF control function
- Protections: Bat. low alarm / Bat. low shutdown / Over voltage / Over temp. / Output short / Reverse polarity / Overload
- Application : Home appliance, power tools, office and portable
- High efficiency up to 91%
- Power ON-OFF switch
- Equipment, vehicle and yacht …etc.
- 3 years warranty
MODEL |
TS-700-112 |
TS-700-124 |
TS-700-148 |
TS-700-212 |
TS-700-224 |
TS-700-248 |
OUTPUT |
RATED POWER (Typ.) |
700W |
MAXIMUM OUTPUT POWER (Typ.) |
800W for 180 sec. / 1050W for 10 sec. / surge power 1400W for 30 cycles |
AC VOLTAGE |
Factory setting set at 110VAC |
Factory setting set at 230VAC |
100 / 110 / 115 / 120VAC selectable by setting button S.W |
200 / 220 / 230 / 240VAC selectable by setting button S.W |
FREQUENCY |
60±0.1Hz 50/60Hz selectable by setting button S.W |
50±0.1Hz 50/60Hz selectable by setting button S.W |
WAVEFORM Note.6 |
True sine wave (THD<3%) |
AC REGULATION (Typ.) |
±3.0% |
SAVING MODE (Typ.) |
Default disabled. Load?5W will be changed to standby mode |
FRONT PANEL INDICATOR |
Battery voltage level, output load level, saving mode, fault and operation status |
INPUT |
BAT. VOLTAGE |
12V |
24V |
48V |
12V |
24V |
48V |
VOLTAGE RANGE (Typ.)Note.3,5 |
10.5 ~ 15VDC |
21 ~ 30VDC |
42 ~ 60VDC |
10.5 ~ 15VDC |
21 ~ 30VDC |
42 ~ 60VDC |
DC CURRENT (Typ.) |
75A |
38A |
19A |
75A |
38A |
19A |
NO LOAD DISSIPATION (Typ.) |
?6W @ standby saving mode |
OFF MODE CURRENT DRAW |
?1mA |
EFFICIENCY (Typ.) Note.1 |
86% |
88% |
89% |
89% |
90% |
91% |
BATTERY TYPES |
Open & sealed Lead Acid |
BATTERY INPUT PROTECTION |
FUSE |
40A*3 |
30A*2 |
20A*2 |
40A*3 |
30A*2 |
20A*2 |
BAT. LOW ALARM |
11.3±4% |
22.5±4% |
45±4% |
11.3±4% |
22.5±4% |
45±4% |
BAT. LOW SHUTDOWN |
10.5±4% |
21±4% |
42±4% |
10.5±4% |
21±4% |
42±4% |
BAT. POLARITY |
By internal fuse open |
OUTPUT PROTECTION |
OVER TEMPERATURE |
80?± 5? |
75?± 5? |
Protection type : Shut down o/p voltage, re-power on to recover; by internal RTH3 detect on heatsink of power diode |
OUTPUT SHORT |
Protection type : Shut down o/p voltage, re-power on to recover |
OVER LOAD (Typ.) |
105 ~ 115% load for 180 sec., 115% ~ 150% load for 10 sec. |
Protection type : Shut down o/p voltage, re-power on to recover |
GFCI PROCTECTION |
Optional (Only type F) |
None |
ENVIRONMENT |
WORKING TEMP. Note.4 |
0 ~ +40? @ 100% load ; +60? @ 50% load |
WORKING HUMIDITY |
20% ~ 90% RH non-condensing |
STORAGE TEMP., HUMIDITY |
-30 ~ +70? / -22 ~ +158oF, 10 ~ 95% RH |
VIBRATION |
10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes |
SAFETY & EMC |
SAFETY STANDARDS |
Design refer to UL458 |
None |
LVD |
None |
EN60950-1 |
WITHSTAND VOLTAGE |
Bat I/P – AC O/P:3.0KVAC AC O/P – FG:1.5KVAC |
ISOLATION RESISTANCE |
AC O/P-FG , Bat I/P-FG:100M Ohms / 500VDC / 25?/ 70% RH |
EMC EMISSION |
Compliance to FCC class A |
Compliance to EN55022 class A, 72/ 245/ CEE, 95/ 54/ CE, E-Mark |
EMC IMMUNITY |
None |
Compliance to EN61000-4-2,3,8 |
OTHERS |
MTBF |
74.4K hrs min. MIL-HDBK-217F (25?) |
DIMENSION |
295*184*70mm (L*W*H) |
PACKING |
3.8Kg; 2pcs/8.6Kg/1.27CUFT |
NOTE |
Efficiency is tested by 530W, linear load at 13V, 26V, 52V input voltage. All parameters not specified above are measured at rated load, 25? of ambient temperature and set to factory setting. 3.lnput derating capacity referenced by curve 2. Output derating capacity referenced by curve 1. The tolerance of each voltage value by models is:112/212?±0.5V;124/224?±1V;148/248?±2V 6.THD is tested by 700W, linear load at 13,26,52V input voltage. |
Posted on July 9, 2016 by BrandonF01 - Uncategorized
Posted on July 6, 2016 by BrandonF01 - Uncategorized
Posted on July 9, 2016 by BrandonF01 - Uncategorized
For more information or to speak with a Power 277 professional please call toll free: (877) 878-2348 or for international calls (001) 702-987-3111.
Posted on July 9, 2016 by BrandonF01 - Uncategorized
Posted on July 8, 2016 by BrandonF01 - Uncategorized
For more information or to speak with a Power 277 professional please call toll free: (877) 878-2348 or for international calls (001) 702-987-3111.
You can download and/or view the PDF specifications for SD-15 / SD-25 / SD-50 / SD-100 / SD-150 / SD-200 / SD-350 / SD-500 / SD-1000 / RSD-100 / RSD-150 / RSD-200 / RSD-300 above.
SD-15 Series Features:
15W Single Output DC-DC Converter
- 2:1 wide input range
- Protections: Short circuit/Over load /voltage
- Built-in EMI filter, low ripple noise
- 100% full load burn-in test
- Low cost
- High Reliability
- 2 year warranty
MODEL |
SD-15A-05 |
SD-15B-05 |
SD-15C-05 |
SD-15A-12 |
SD-15B-12 |
SD-15C-12 |
SD-15A-24 SD-15B-24 |
SD-15C-24 |
OUTPUT |
DC VOLTAGE |
5V |
12V |
24V |
RATED CURRENT |
3A |
1.25A |
0.625A |
CURRENT RANGE |
0 ~ 3A |
0 ~ 1.25A |
0 ~ 0.625A |
RATED POWER |
15W |
15W |
15W |
RIPPLE & NOISE (max.) Note.2 |
100mVp-p |
120mVp-p |
150mVp-p |
VOLTAGE ADJ.RANGE |
4.75~5.5VDC |
10.8~13.2VDC |
21.6~26.4VDC |
VOLTAGE TOLERANCE Note.3 |
±2.0% |
±1.0% |
±1.0% |
LINE REGULATION |
±0.5% |
±0.3% |
±0.2% |
LOAD REGULATION |
±0.5% |
±0.3% |
±0.2% |
SETUP, RISE ,HOLD UP TIME |
2.5s, 25ms,— 12VDC/24VDC/48VDC at full load |
INPUT |
VOLTAGE RANGE |
A: 9.2 ~18VDC B:18 ~ 36VDC C:36~72VDC |
EFFICIENCY(Typ.) |
68% |
76% |
75% |
72% |
76% |
79% |
70% |
77% |
78% |
DC CURRENT(Typ.) |
1.9A/12VDC 0.9A/24VDC 0.45A/48VDC |
PROTECTION |
OVER LOAD |
105 ~160% rated output power |
Protection type : Hiccup mode, recovers automatically after fault condition is removed |
OVER VOLTAGE |
5.75 ~ 6.75V |
13.8~ 16.2V |
27.6 ~ 32.4V |
Protection type : Shut off o/p voltage, clamping by zener diode |
ENVIRONMENT |
WORKING TEMP. |
-10 ~ +60? (Refer to “Derating Curve”) |
WORKING HUMIDITY |
20 ~ 90% RH non-condensing |
STORAGE TEMP., HUMIDITY |
-20 ~ +85?, 10 ~ 95% RH |
TEMP. COEFFICIENT |
±0.03%/? (0 ~ 50?) |
VIBRATION |
10 ~ 500Hz, 2G 10min./1cycle, 60min.each along X, Y, Z axes |
SAFETY & EMC (Note 4) |
WITHSTAND VOLTAGE |
I/P-O/P:1.5KVAC I/P-FG:1KVAC O/P-FG:0.5KVAC |
ISOLATION RESISTANCE |
I/P-O/P,I/P-FG,O/P-FG:100M Ohms / 500VDC / 25?/ 70% RH |
EMC EMISSION |
Compliance to EN55022(CISPR22) |
EMC IMMUNITY |
Compliance to EN61000-4-2,3,4,6,8, EN55024, light industry level, criteria A |
OTHERS |
MTBF |
644.2K hrs min.(SD-15A) 652.5K hrs min.(SD-15B) 653.5K Hrs min.(SD-15C) MIL-HDBK-217F (25?) |
DIMENSION |
78*51*28mm (L*W*H) |
PACKING |
0.18Kg,60 PCS/11.8Kg |
NOTE |
All parameters NOT specially mentioned are measured at normal input, rated load and 25°C of ambient temperature. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. Tolerance: includes set up tolerance, line regulation and load regulation. The power supply is considered a component which will be installed into final equipment. All the EMC tests have been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how toperform these EMC tests, please refer to “EMI testing of component power supplies.” (available on http://www.meanwell.com) |
Posted on July 8, 2016 by BrandonF01 - Uncategorized
For more information or to speak with a Power 277 professional please call toll free: (877) 878-2348 or for international calls (001) 702-987-3111.
You can download and/or view the PDF specifications for SRS / SUS01 / SPR01 / SMU01 / SMA01 / SBT01 / SFT01 / SPA01 / SPA02 / SMU02 / SPU02 / SPU03 / SPB03 / SPB05 / SCW03 / SCW05 / SLW05 / SCW08 / SKE10 / SCW12 / SKE15 / SKA15 / SKM15 / SKA20 / SKM30 / SDM30 / SKA40 / SKM50 / SKA60 / DET01 / DCW03 / DCW05 / DLW05 / DCW08 / DKE10 / DCW12 / DKE15 / DKA15 / DKA30 TKA30 / MHB75 / MHB100 / MHB150 above.
SRS Series Features:
0.5W DC-DC Regulated Single Output Converter
- 1000VDC I/0 isolation
- Internal SMD technology
- Built-in EMI filter
- Cooling by free air convection
- Non-conductive plastic case
- Dual in line package
- 100% burn-in test
- Low cost / High reliability
- Approvals: FCC / CE
- 2 years warranty
ORDER NO. |
SRS-0505 |
SRS-1205 |
SRS-2405 |
SRS-4805 |
SRS-0509 |
SRS-1209 |
SRS-2409 |
SRS-4809 |
OUTPUT |
DC VOLTAGE |
5V |
9V |
CURRENT RANGE |
0 ~ 100mA |
0 ~ 56mA |
EFFICIENCY (TYP.) |
60% |
60% |
ORDER NO. |
SRS-0512 |
SRS-1212 |
SRS-2412 |
SRS-4812 |
SRS-0515 |
SRS-1215 |
SRS-2415 |
SRS-4815 |
OUTPUT |
DC VOLTAGE |
12V |
15V |
CURRENT RANGE |
0 ~ 42mA |
0 ~ 34mA |
EFFICIENCY (TYP.) |
60% |
60% |
Posted on February 28, 2017 by BrandonF01 - Uncategorized
Soon after the new generation Level VI desktop type power supply ~ ENP-120 series (120W) and programmable desktop type battery charger ~ ENC-120 series (120W) of MEAN WELL were released to the market, the ENP and ENC family have received positive responses. In order to further fulfill the application demands for higher wattage, MEAN WELL is pleased to launch the new 180W/240W ~ ENP-180/240 and ENC-180/240 series.
The features and the dimensions of these four series follow the ENP/ENC-120 characteristics respectively, accepting 90~264VAC input, built-in active PFC function, standard 7” width, complete safety regulations (UL/CUL/CB/CE/FCC). Furthermore, the desktop power supply ENP family complies with EISA 2007/DoE Level VI, NRCan, EU ErP and CoC Version 5; the programmable charger ENC family provides the programmable function and MCU control that the users, with a personal computer, the smart battery charging programmer SBP-001 and its specific software, are able to adjust the charging mode and parameters on the basis of different battery characteristics. Therefore, the products of these three families are very suitable to be applied to radio system backup solution, land mobile radio system, surveillance system and electric scooter charger applications.
- Input range: 90~264VAC
- Built-in active PFC function
- ENP: Complies with EISA 2007/DoE Level VI, NRCan, EU ErP and CoC Version 5
- ENC: Charger for lead-acid batteries (flooded, Gel and AGM) and li-ion batteries (lithium iron and lithium manganese)
- 125% peak load capability (ENP only)
- Built-in 3 stage programmable charging curve (ENC only)
- Working temperature: -30~+70℃
- Fanless design, cooling by free air convection
- Built-in temperature compensation function (ENC only)
- Protections:
ENP: Short circuit/Overload/Over voltage/Over temperature
ENC: Short circuit/Over voltage/Over temperature/ Battery under voltage & Battery over voltage & Battery reverse polarity protection
- Comply with UL/CUL/CB/CE/FCC
- Dimension (L x W x H): 192 x 178 x 45.5 mm
- 3 years warranty